Assembly Exploded View (Requires pre-installing the toilet handle into the mold beforehand) 3. Add an appropriate amount of PVC stock solution and PVC special color paste into the injection machine, set the temperature to 170℃, and start heating. 4. After heating is complete, use the injection machine to inject the material into the mold's injection port (push the plunger until it cannot be pushed further, then hold for 3-5 seconds to remove larger bubbles). 5. After injection, wait for 6-8 minutes to allow the PVC softgel to cool down. 6. Once cooled, first pull out each core pin and open the mold, then demold. During demolding, slowly separate the softgel from the mold to avoid damaging the product with excessive force. 7. Remove burrs and any excess softgel produced at the exhaust port and injection port.
