Add an appropriate amount of PVC raw liquid and PVC-specific color paste into the injection molding machines, and start heating .
After heating is complete, use the injection machine to inject the material into the mold's injection port (push the plunger until it can't go any further, and hold for 3-5 seconds to remove larger bubbles).
After injection, wait 6-8 minutes to allow the PVC soft gel to cool.
Once cooled, first pull out each core pin and open the mold, then demold. During demolding, slowly separate the soft gel from the mold to avoid damaging the model by excessive force.
Remove flash and excess soft gel formed at the vent and injection port.
8.Assemble the finished product according to the diagram below.
